Nt6X69 In An Rsc-M - Nortel DMS 100 Series Maintenance Manual

6-2 RSC-M card replacement procedures
NT6X69
in an RSC-M
Application
This procedure replaces an NT6X69 circuit card in a Remote Switching Center
Multi-access (RSC-M) main shelf.
Note: In the examples of this section, RSC-M refers to RCO2. When
software outputs messages to the MAP terminal, the software does not
differentiate between the two types of RCO2.
PEC
NT6X69
Common procedures
Does not apply
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform the procedure.
297-8223-550 Standard 04.02 November 2000
Suffixes Name
LB Message and tone card