Nortel DMS 100 Series Maintenance Manual page 256

6-104 RSC-M card replacement procedures
NTRX41
in an RSC-M/MSP
7
8
9
297-8223-550 Standard 04.02 November 2000
(end)
c Push in lever on the upper left side of alarm module.
d Tighten the knurled thumbscrew at the top of the circuit card.
If the alarm light
remains off (or light for a short
time)
turns on
Go to the common returning a card procedure in this document.
This procedure is complete. Return to the maintenance procedure that
directed you to this card replacement procedure. Continue as directed.
For additional help with this card replacement, contact the next level of
support.
Do
step 7
step 9