1-20
Initialization
Database Programming Worksheets
Technical Manuals Online! - http://www.tech-man.com
The system has been pre-programmed with certain features called
default data (refer to
into memory when the system is initialized.
The system should be initialized when installed or at any time the
database has been corrupted.
Returning System Database to Default Values:
1. Place Switch #1 on the BKSU in the ON position.
2. Turn the power off and on to initialize the system database to the
default.
3. Once database is initialized, place Switch #1 in the OFF position to
protect the database.
Before attempting programming, it is strongly recommended that
customer database worksheets be prepared (Refer to Appendix C in the
Product Description Manual). These worksheets should become part of
the permanent record of customer programming. Refer to the following
sections when preparing the worksheets.
Table 1-1: Default
Values). These features are loaded
Initialization