32
Unanswered CO Call Transfer
While idle or on an internal/external call and an incoming or
transferred CO call is ringing at your station:
1.
If on another call, place the current call on hold, and replace
the handset or press the ON/OFF button.
2.
Dial the INC CO XSFR code [639], or press the preprogrammed
INC CO XSFR flexible button.
3.
Press a DSS, Group button, or dial a station or group number.
The call automatically transfers to that destination.
4.
You can then return to the call placed on hold.
Unscreened Transfer
1.
Press TRANS.
2.
When the called extension begins to signal, hang up to
transfer the call (the Recall Timer start).
3.
Replace the handset, or press the ON/OFF button.
Trunk-To-Trunk Transfer
While connected to an outside line (PBX/Centrex):
1.
Press TRANS. The transfer dial tone sounds.
2.
Press a CO line / Loop flexible button.
-or-
Dial [9].
-or-
Dial a CO line/group access code.
3.
Dial the desired outside line destination number.
4.
Hang up to complete the transfer.
STSe Station User Guide
E911 feature enabled precludes dial 9 access.
LCR feature enabled precludes Loop button
access.
Call Transfer
August 2005