13. Trigger Settings (Capturing Target Data to be Recorded)
13.1. Trigger Mode Description
This recorder provides with four trigger modes: OR, AND, WINDOW, and OFF. Other than these modes,
there are manual trigger and external triggers, which are valid regardless of the input signal.
13.1.1. Trigger Mode - Operation at OR
A trigger is generated either of two channels that are set for trigger source satisfies the trigger
condition. The OR setting for all channels are also available.
Example: Both of slopes for CH1 and CH3 are set to "rising edge."
Trigger level
CH1
CH3
13.1.2. Trigger Mode - Operation at AND
Trigger is generated all channels that are set for trigger source satisfied the trigger condition. The
AND setting for all channels are also available.
Example: Both of slopes for CH1 and CH3 are set to "rising edge."
Trigger level
CH1
CH3
Trigger level
Trigger
Trigger level
Trigger
13-2
Trigger
Trigger
Trigger
Trigger
RA2300A Recorder (7001754-R01)