Waveform Display Region; Shift Of Waveform Display Region; Shift Of Cursor Position - A&D Omniace III RA2300A Instruction Manual

14. Replay Display (Displaying Recording Data)

14.3. Waveform Display Region

The thumbnail that indicates waveform display region is displayed on the Replay Monitor screen and
the Y-T waveform.
(4) Auto scroll
(1) Waveform Display Region
This is the time axis domain currently being displayed.
(2) Cursor position
Cursor positions X1 and X2 are indicated.
(3) Thumbnail
Full data for a channel is displayed in a compressed form. Also, touching the thumbnail portion
can move the display position of the Y-T waveform.
Channel that can be displayed on the thumbnail can be specified. For more information,
TIPS
see 15. Display and Printing.
(4) Auto scroll
The displayed region can be scrolled automatically. By touching a thumbnail display portion,
auto-scrolling stops.

14.3.1. Shift of Waveform Display Region

To shift the waveform display region, refer to the following methods.
Operation with thumbnail
●
By touching the thumbnail display portion, the waveform display region can be shifted. The
auto-scroll buttons at both sides allows one-direction scrolling.
Shift through operation panel
●
Press the Scroll button on the operation panel to make scrolling effective. When scrolling
becomes usable, the LED of the Scroll button comes on. Turning the job dial shifts the display
region.
Shift through jump faction
●
Jump to the trigger detection point or making point is available. Moreover, jump to the
maximum or minimum point for each channel is available. For more details, see [14.6Jump]

14.3.2. Shift of Cursor Position

To shift the cursor position, refer to the following methods.
Shift through operation panel
●
Press the Cursor button on the Operation Panel to make the cursor effective. When the cursor
becomes usable, the LED of X1 or X2 of the Cursor button comes on. Turning the jog dial can
move the cursor. Smaller-step shift is available using the Fine button on the Operation Panel.
Shift through screen touch
●
Direct cursor shift is possible by touching the waveform display portion when the cursor shift is
effective on the Operation Panel.
(1) Waveform display region
(2) Cursor position
(3) Thumbnail
(4) Auto scroll
14-4
RA2300A Recorder (7001754-R01)