Recording Condition Setup; Rec Icon - A&D Omniace III RA2300A Instruction Manual

10.2. Recording Condition Setup

Open the following screen by pressing the Recording Condition button on the Operation Panel to set
the recording conditions for HD Recorder. The recording condition setup should be made while the
recorder stops its operation. Setup can be made during recording.

10.2.1. REC Icon

The icons signify recording settings and status.
Recorder stop
OFF (White)
Recorder stop
ON (Green)
Trigger wait
(Yellow)
Operating
(Amber)
Error
(Red)
Remark
RA2300A Recorder (7001754-R01)
REC Icon
(1) Waveform chart printing setup and status display
(2) HD recording status indication
(1) Chart Printing
None
Pressing waveform
printing ON/OFF is switched.
Setup while the recorder is
recording data is possible.
10. HD Recorder (Recording data in the internal HDD)
HD Recording Setup Block
(2) HD Recording
chart
10-3
(3) Others
As memory recording
does not operate,
indication is invalid.