16.5.2. Data No. Setting
The number that is assigned to the measurement data can be changed. In the System screen use the
Recording Settings screen. Pressing
The data number increments automatically after recording. This function is useful to identify
TIPS
the recording data order. The data number can be confirmed on the upper portion of the
waveform printing and replay monitor.
16.5.3. Print Settings
This screen is used to set printing format such as chart paper waveform printing. In the System screen,
press the Recording Settings screen. Pressing
(1)
Printing Item ON/OFF
Whether to print or not print can be determined using tick box for channel mark, system
annotation, channel annotation, time-axis scale, measurement information, signal name, and user
annotation.
(2)
Annotation character string entry
Character strings for measurement information, signal name, and user annotation can be made.
A text file that is edited by a personal computer can be read. For more details, see
TIPS
[16.4.6Environment Save] [16.4.7Readout].
◆
(3)
Grid pattern setting
◆
The grid pattern for waveform or X-Y printing can be specified.
(4)
Amplitude Scale Settings
Whether the amplitude scale is printed or not can be specified. Also, if the scale is printed,
printing format can be specified.
Batch: Only maximum and minimum values are printed in one line. The middle scale is not
TIPS
printed.
◆
Individual: The middle scale is also printed but more chart paper will be consumed as one
◆
channel takes one line to print. To save chart paper, it is recommended to select Batch.
RA2300A Recorder (7001754-R01)
Data No.
displays numeric pad, enabling value data entry.
Print Settings
16-11
16. System Setup (Other Functions)
displays the following screen.
(3)Grid pattern setting
(4)Amplitude Scale Settings
(1)Printing Item ON/OFF
(2)Annotation character string entry