14.8.4. Specifying Number of Skip in CSV
Use the (4) button to specify the number of skip in CSV save.
Data will be rough if skipping is specified but it is possible to make file size small.
TIPS
14.8.5. Specifying File Save Destination
Use the (5) button to specify the file save destination.
The output file extension will be fixed. (Binary save = DRT, CSV save = CSV)
TIPS
14.8.6. Execution of Data Output
Output to chart paper is made with the (6) button. File save is made with the (7) button.
Output can be stopped with the Stop button on the Operation Panel. If the file save
TIPS
operation is terminated, the file being saved will be discarded.
During the data output, the other operations do not start. Do not disconnect the
NOTE
connection to a drive during file save.
To output two or more data correctively, use the File Operation on the System screen.
TIPS
For more details, see 16. System Setup.
RA2300A Recorder (7001754-R01)
14. Replay Display (Displaying Recording Data)
14-11