A&D Omniace III RA2300A Instruction Manual page 35

(8) Open the recording section cover by raising the lever
After opening the cover, pull out the paper from the case through the opening under the cover.
Recording paper cover
Pull out the paper through
the opening under the cover
(9) Thread the paper through the z-fold paper adapter
Thread the paper pulled out from under the cover through the z-fold paper adapter as shown below.
(10) Insert the paper adapter in the slots of the cover
Press the paper adapter with the paper wound on it into the slots until a click is heard. Insert the
paper wound on the adapter in the opening under the platen roller (black roller) of the recording
section and pull it out about 10 cm.
Insert the paper adaptor with the
paper wound on it in the cover.
Pull the paper wound on the paper adaptor out
the cover as shown route.
RA2300A Recorder (7001754-R01)
Z-fold paper adapter
3-7
3. Pre-measurement Procedures
Paper
out from under
the adapter.
pulled