Hd Recorder Mode; Pen Recorder Mode; X-Y Recorder Mode - A&D Omniace III RA2300A Instruction Manual

20. Specifications

20.3.2. HD Recorder Mode

Use this mode to acquire measuring data of input signals directly to a built-in HDD.
Acquisition method can be configured sample or peak.
Acquisition
Operation
Acquisition Drive
recording speed
Time Axis
Acquisition method
Waveform
Recording ON/OFF
Data Output
Format

20.3.3.Pen Recorder Mode

Use this mode to record measuring data with the image of a pen recorder.
Paper Feeding
Speed
Time Axis
Paper Feeding
Accuracy
Time Axis
Interpolation
Data recording
Time Axis dot
pitch
Amplitude Axis
dot pitch

20.3.4. X-Y Recorder Mode

Use this mode to output an X-Y image on a screen/recording paper. HDD recording is also available
at the same time.
The recording method can be configured sample.
Setting Channel
Recording Density At the time of output on recording papers: 1600 x 1600 dots
Interpolation
Sample Speed
*An Even Amp Unit is not available.
Push Start key on the operation panel to start. (Staring with built-in timer is
also available)
Built-in HDD drive
1 to 999 s, 1 to 999 ms, and 1 to 100 s；User1,User2.
*The recording speed of over 10μs needs conditions: 1μs at 1Ch and 10μs
at 2 to 16 Ch.
0.01%
Sample (Acquiring data in every recording speed to media)
Peak (Acquiring maximum and minimum values in every recording interval
during 1μs sampling to media.)
While acquiring data, recording waveform on recording papers is available.
Recording can be configured aside form recording.
Only binary
1, 5, 10, 20, 50, 100 mm/s
1, 5, 10, 20, 50, 100 mm/min
User setting 1, User setting 2: Any speed from 1 to 100 mm/s and 1 to 100
mm/min can be specified.
Recording waveforms with external clock synchronization is also available.
(by the external pulse input of a remote unit)
*Time/div display is available.
Within ±0.01%(Error of time and printed grid, at ordinary temperatures)
Within ±2%
10 mm/div
Available
Peak detection with 1μs sampling
10 dots/mm
8 dots/mm
Any 1Ch in the X axis and 3Ch in the Y axis can be specified.
Available (line)/Not available (dot)
1 to 1000 ms
20-10
RA2300A Recorder (7001754-R01)