A&D Omniace III RA2300A Instruction Manual page 34

3. Pre-measurement Procedures
The procedures for loading the z-fold paper are explained as follows.
(6) Place the recorder on top of the paper case
Set the paper case on a flat surface with its opening on the left. Then place this recorder on top of
the case, aligning the rubber legs with the metal fittings of the case.
Aperture
(7) Put the paper in the case
(1)
Remove the contents from the case, open the plastic bag and take out the piece of cardboard
covering the paper. Use the top cover of the case as a receptacle for the recorded paper.
(2)
Place the paper in the stock box with the thermally sensitive side (the side with blue numbers
printed on the edges) facing up.
(3)
Position the stock box so the paper flap edge (non-folded edge) is facing toward you and insert the
box into the case opening.
開口部
上ブタ
Top cover
(記録紙受け箱として使用)
Paper board(white)
ボール紙(白)
感熱面 Thermal sensitive side
折畳紙用ストック箱
RA1200
RA1300
3-6
本製品
Main Unit
折畳紙収納ケース
Z-fold paper supply case
Z-fold paper stock box
Z-fold paper case
RA2300A Recorder (7001754-R01)