A&D Omniace III RA2300A Instruction Manual page 39

 After power application
After applying power, check the following.
(1) Confirm that the image is properly displayed on the screen
The [Input Monitor] screen will be displayed immediately after power application.
(2) Confirm that the paper is fed correctly
This can be confirmed by pressing the [Feed] key on the operation panel. If no paper is fed,
check whether the cover is closed properly or not.
(3) The pre-measurement procedures are completed.
RA2300A Recorder (7001754-R01)
3-11
3. Pre-measurement Procedures
Feed
Press