Test Print; Data Printing; Time Calibration - A&D Omniace III RA2300A Instruction Manual

16.8.2. Test Print

Test printing is made in order to check the printer printing quality. Pressing the
Maintenance screen in System opens the confirmation screen. Pressing "Execute" button starts the
test print. To close, press "Cancel" button.

16.8.3. Data Printing

The measurement mode is set to Data Chart Print. In this mode, measured values are printed output in
character strings.

16.8.4.Time Calibration

Internal watch is set. Press the
The following screen appears. Select window whose value should be set among windows of year,
month, day, hour, time, minutes, and second. Enter a value and press OK button. Time can be set.
RA2300A Recorder (7001754-R01)
Watch Calibration button on the Auxiliary Settings screen in System.
/ /
： ：
Cancel
Execute
16-19
16. System Setup (Other Functions)
Test Print button on the