Overview Of Replay Monitor - A&D Omniace III RA2300A Instruction Manual

14. Replay Display (Displaying Recording Data)

14.1. Overview of Replay Monitor

The Replay screen is used to display the data recorded in memory or file. Waveform display for
recorded data is available after the data is selected in the list.
(1)
(9)
(1) Data Selection
(2) Output Selection
(3) Thumbnail
(4) Digital Indication
(5) Signal Setup
(6) Jump
(7) Time Axis Scaling
(8) X-Y Display
(9) Y-T Display
(10) Position
(11) Scale
(12) Signal Name
(13) Digital Indication
(14) Cursor position info
Display can be set to OFF for scale, signal name, digital indication, and cursor position
TIPS
info. To keep the waveform display area as large as possible, set these settings to OFF.
For more information, see 15. Display and Printing.
(2)
(3)
(4)
(10) (11)
Selects referencing data
Outputs to chart or file
Displays Y-T waveform display area
Switches digital indication
Sets each signal channel
Executes time axis jump
Enlarges or compresses time axis
Switches X-Y waveform display
Switches Y-T waveform display
Indicates zero position for each signal
Displays scale for amplitude axis
Signal name indication
Indicates value at cursor position
Indicates cursor position info
(5) (6) (7)
(12) (13)
14.2Replay Data Selection
14.8 Output Setup
14.3Waveform Display Region
14.4 Digital Indication
14.5 Signal Settings
14.6 Jump
14.7 Time Axis Magnification
14.9 X-Y Waveform Display
15. Display and Print
15. Display and Print
14.4 Digital Indication
14.4 Digital Indication
14-2
(8)
(14)
Operation Panel
RA2300A Recorder (7001754-R01)