External Sync Rate Setting - A&D Omniace III RA2300A Instruction Manual

(5) Specify the start interval of time
(6) Specify the operation time.
The actual recording operation time may be shortened depending on the recording length
settings. When the timer function is set, a symbol of clock is displayed upper part of the
TIPS
screen. The next recording start time is indicated near the clock. See below.

16.5.7. External Sync Rate Setting

When External Sync is set for the chart feed speed for waveform chart printing, the chart feed speed
per one pulse for external synchronous signal can be set.
To execute the external sync printing, Remote Unit (RA23-144, optional) must be needed.
ＮＯＴＥ
For more details on the remote unit and external sync printing, see Chapter 17 How to Use
Optional Devices.
RA2300A Recorder (7001754-R01)
(1 H)
(20min)
16-13
16. System Setup (Other Functions)