Multi Recorder Mode - A&D Omniace III RA2300A Instruction Manual

20.3.5. Multi Recorder mode

(1) Memory Recording
Recording speed
Memory size
Block segmentation 1, 2, 4, 8, 16, 32, 64, and 128 segmentations
Recording
operation
(2) HD Recording
Recording
operation
Recording drive
Recording speed
Recording method
Waveform printing
ON/OFF
Data output format
(3) Pen Recording
It is possible to print input signals directly on the chart paper.
Paper Feeding
Speed
Time Axis
Paper Feeding
Accuracy
Time Axis
Interpolation
Data recording
Time Axis dot
pitch
Amplitude Axis
dot pitch
RA2300A Recorder (7001754-R01)
The speed is set with sampling cycle.
1 to 999 s, 1 to 999 ms, and 1 to 100 s.
1 to 999 s, 1 to 999 ms, 1 to 100 s can be set for Users 1 and 2.
* Recording started by external clock synchronization (External sampling
input from remote unit)
2M data/CH
Starting with the Start button on the operation panel. Chose a mode from
among Once, Repeat, and Endless.
Recording mode
Once
Repeat
Endless
* The Endless mode overwrites new data over old data.
Recording operation starts with the Start button on the operation panel.
Starting with a time trigger is also possible.
Internal HDD drive or external drive (USB supported)
1 to 999 s, 1 to 999 ms, and 1 to 100 s；User1,User2.
* High-speed recording may not be available depending on the drive to be
recorded and channels to be recorded.
Peaks (Recording max. and min. values among sampled values by 1 μs in
HDD)
Waveform printing on chart paper with recording data is available. The
chart feed speed is the same as the speed of monitor printing.
Only binary
1 to 100mm/s, 1 to 100mm/min.
Waveform printing synchronized with external clock, i.e. external sampling
input in the remote unit, is possible.
Within ±0.01%(Error of time and printed grid, at ordinary temperatures)
Within ±2%
10mm/div
Provided
Peak detection with 1μs sampling
10 dots/mm
8 dots/mm
20-11
Recording operation
Ends after recording once
Ends after recording the number of times
equivalent to the number of memory block
Continuously records until the operation is
stopped
20. Specifications