A&D Omniace III RA2300A Instruction Manual page 50

5. Input Signal Monitor (Observing Input Signals)
5.1. Observing Input Signals
To observe the signals that are input, use the Input Signal screen. This screen displays the signals that
are input in real time. The waveforms can be frozen as necessary.
The signals can be seen in Amp, Recording Condition, and Trigger screens, too. When
ＴＩＰＳ
the measurement mode is Pen Recorder or X-Y Recorder, howerver, special screen
appears.
Amp setup screen
Pen recorder screen
5-2
RA2300A Recorder (7001754-R01)