Overview Of Multi Recorder Mode - A&D Omniace III RA2300A Instruction Manual

11. Multi Recorder - Separately Executing Waveform Printing, Memory Recording and HD Recording

11.1.Overview of Multi Recorder Mode

Multi Recorder enables operations of Memory Recorder, HD Recorder, and waveform printing at the
same time. This Recorder is suitable to the measurement such that data before or after the trigger is
precisely recorded while long-time recording is made.
The waveforms of recorded data file are displayed on the replay monitor screen. With the event jump
function of replay monitor, switching between HD recording data and memory recording data can be
switched to confirm the data being recorded. For the event jump function, see 14. Replay Display.
In order to set the recorder to the Multi-Recorder mode, use the Measurement Mode tab in the System
screen. Besides, setting of measurement mode can be made in the Startup screen displayed upon the
recorder startup. (* The Startup screen may not be displayed depending on the settings.)
Measurement
mode selection
Operation panel
Setup completes after
mode turns to yellow after
execution.
the
Pressing Close closes the Setup screen.
The mode setting completes after the
screen is switched.
RA2300A Recorder (7001754-R01)
11-2
Press OK