A&D Omniace III RA2300A Instruction Manual page 89

11. Multi Recorder - Separately Executing Waveform Printing, Memory Recording and HD Recording
① File output path
The path for file save can be specified. Pressing the key opens the following dialog box.
a)
b)
c)
d)
a） Path for file save
Specify the path for file save. You can choose a USB storage drive other than internal HDD.
b） ON/OFF for user-specified folder
Setting to ON creates a folder that are specified by user. The place under this folder becomes
the place for file save.
c） ON/OFF for folder by day
Pressing ON creates the file by day referencing the starting time. The place under this folder
becomes the place for file save.
d） Arbitrary file name (Top four letters)
An individual file name can be set in memory recording and file recording. The file name
consists of eight letters: specified four letters for the first half and automatically assigned four
letters for the latter half. "fsd" (binary save) is appended as an extension.
② Memory recoding setup block
Settings for memory recording can be made.
③ HD recording setup block
Settings for HD recording can be made.
④ Waveform chart recording
Settings for waveform chart printing can be made.
ａ）
ｂ）
ON/OFF for printing
a）
ON/OFF for waveform chart printing can be set. Change of setting during recording can also
be made.
Operations synchronized to recording speed
b）
Ticking the checkbox permits a synchronized operation between waveform chart printing
speed and recording speed. To separate recording speed and chart printing speed, remove
the tick.
RA2300A Recorder (7001754-R01)
11-5
Ｃ）