Recording Speed Table; Time-Axis Representation; Timer Recording Settings - A&D Omniace III RA2300A Instruction Manual

16. System Setup (Other Functions)

16.5.4. Recording Speed Table

User can sets the speed for waveform chart printing, memory recording, and HD recording. Press the
System screen, and then press the Recording Settings screen. Pressing
displays the following screen.

16.5.5. Time-axis Representation

Press the System screen, and then press the Recording Setting screen. Pressing
Representation screen changes the time-axis units upon waveform recording.
If the recording speed is set to the external synchronization, time-format representation is
TIPS
disabled. Numerical value representation is forcibly set.

16.5.6. Timer Recording Settings

Recording start and finish is controlled by time.
Recording start and finish can be set to the time whose timer function can be validated. Recording
operation in constant interval and constant time is available. Press the System screen, and then press
the Recording Setting screen. Pressing
(1)
(4)
Example: To make 20-minute recording every hour from 0:00 a.m. on December 24, 2004 to 0:00 a.m.
on the next day.
(1) Tick the box for "Using Start Timer Function."
To use timer function, add a check mark.
(2) Select the starting time
(3) Select the finish time
(4) Tick the box for "Use the interval function."
Do not tick if the measurement is only once. Add a check mark only when repeated recording is
made.
Timer Recording screen opens the following screen.
(2004/12/24 0:00)
(2004/12/25 0:00)
16-12
Recording Table
Time-axis
(2)
(3)
(5)
(6)
RA2300A Recorder (7001754-R01)
button