Overview Of Memory Recorder Mode - A&D Omniace III RA2300A Instruction Manual

9. Memory Recorder (Recording High-speed Signals)

9.1. Overview of Memory Recorder Mode

The Memory Recorder mode is useful for recording high-speed signals since the this mode features a
highest sampling rate of 1 s. Data recording of a certain period of time before trigger is available.
Automatic printing of data on chart recording paper (Auto Copy) or file saving (Backup Filing) is also
available. In addition, replay of waveforms on the monitor is possible.
To set the RA2300A to the Memory Recorder mode, use the Measurement Mode tab on the System
screen. Mode setting is can also be made on the Startup screen that is displayed upon the startup.
(Depending on the startup screen, the Startup screen may not be displayed.)
Measurement
mode selection
Operation panel
Setup completes after the
mode turns to yellow after
execution.
Pressing Close closes the Setup screen. The
mode setting completes after the screen is
switched.
9-2
RA2300A Recorder (7001754-R01)
Press OK.