14. Replay Display (Displaying Recording Data)
14.8. Output Setup
Displayed data can be printed out or exported into a file. To execute data output, press the Output
Setup button on the upper part of the Replay screen. Then the following screen opens.
14.8.1. Specifying Output Time Range
Use the (1) button to specify the data output time-axis range. Select from among "Between cursors"
or "Specifying in percentage in reference to the trigger point" If "Specifying in percentage in
reference to the trigger point" is selected, specify percentage.
To output all, select "Specifying in percentage in reference to the trigger point" and
TIPS
choose 100 for percentage.
14.8.2. Specifying File Save Format
Use the (2) button to specify the format at file save. Select binary or CSV. If CSV is selected, the
number of skip and delimiter can be specified.
The file extension will be DRT that is output in the binary format. The binary save file can
NOTE
be referenced in the Replay screen.
The file extension that is output in the CSV format will be CSV. The CSV save file cannot
NOTE
be referenced in the Replay screen.
14.8.3. Specifying CSV Delimiter
Use the (3) button to specify the delimiter upon the CSV save. Select comma or tab.
(6)
(7)
14-10
(1)
(2)
(3)
(4)
(5)
RA2300A Recorder (7001754-R01)