Monitor Displaying And Setting Function - A&D Omniace III RA2300A Instruction Manual

20. Specifications

20.2.6. Monitor displaying and setting function

Use the Operation Panel (including jog dial) and the touch panel to configure various settings
(1) Input Setting Screen
Use this screen to configure the waveform of input signals and input setting.
Digital values and cursor values of an input signal can be displayed.
Operation Panel
Input
Amp
Trigger
Acquisition
View/Record
Operation Button
FREEZE
TRIG SYNC
Switching
Monitor
Monitor Speed
Digital Display
Key Lock
(2) Playback Setting Screen
Use this screen to select the main unit's memory and the filing data, configure physical
quantity conversion setting, display playback waveforms, and so on.
Screen Select
Button
Selecting Data
Output
Specification
Copy
Digital Display
Signal Setting
Jump
Time Axis
X-Y
Key Lock
Display waveforms on the whole screen.
Configure amp settings and physical quantity conversion of an input signal.
Configure the settings of trigger modes, trigger conditions, recording
operations, pre-triggers, and trigger filters.
Configure the settings about recording such as speed.
Configure the settings such as scale views, signal names, grids, waveform
segmentations.
Monitor Displaying can be paused.
Monitor Displaying synchronized a trigger detection is available.
Monitor Displaying under each of specified condition is available.
Configure the speed of input monitor.
Display input signals in digital form.
Cancel the Key Lock setting.
Select the data for playback.
Configure where to output and the output condition.
Copy the range specified by an output setting.
Configure the digital value for displaying.
Configure the amp setting of a channel of which data is played back.
Configure an arbitrary position to move the range of monitor displaying.
Configure narrowing/extending of waveform time axis.
Display data in X-Y format.
Configure ON/OFF of a Key Lock
Configuration
Configuration
Configuration
20-8
RA2300A Recorder (7001754-R01)