Settings By Trigger Mode; Trigger Mode Or; Trigger Mode And - A&D Omniace III RA2300A Instruction Manual

13.4. Settings by Trigger Mode

13.4.1. Trigger Mode OR

Trigger is generated upon the satisfaction of either of the trigger conditions set as the trigger source.
The OR setting for all channels are available.
Trigger setting

13.4.2. Trigger Mode AND

Trigger is generated upon the satisfaction of the trigger condition for all channels that are set as the
trigger source.
Trigger setting
RA2300A Recorder (7001754-R01)
13. Trigger Settings (Capturing Target Data to be Recorded)
Setting the trigger mode to OR.
Selection of the trigger source channels to be set and
settings of rising or falling edge for the signal is made.
Setting the trigger generation level
Setting the trigger mode to AND.
Selection of the trigger source channels to be set and
settings of rising or falling edge for the signal is made.
Setting the trigger generation level
13-7