Overview Of Hd Recorder Mode - A&D Omniace III RA2300A Instruction Manual

10. HD Recorder (Recording data in the internal HDD)

10.1. Overview of HD Recorder Mode

The HD Recorder mode can record data in the internal hard disk, which is suitable for a long-time
measurement. In addition, waveform chart paper printing can be made with the HD recording at the
same time. The data recorded in the HD can be replayed on the monitor screen in the form of
waveforms.
To set the recorder in the HD Recorder mode, use the Measurement Mode tab in the System screen.
Settings of measurement mode can be made on the Startup screen displayed upon the startup. (*The
startup screen does not appear depending on the setup.)
Measurement
mode selection
Operation Panel
Setup completes after the
mode turns to yellow after
execution
The drive for data recording is fixed to the internal HDD only. For details on data output
ＮＯＴＥ
to the USB storage, see Replay Screen - Data Output or System - File Operation.
Pressing Close closes the Setup screen. The
mode setting completes after the screen is
switched.
10-2
RA2300A Recorder (7001754-R01)
Press OK.