Measurement Mode; Screen Display Upon Startup - A&D Omniace III RA2300A Instruction Manual

16. System Setup (Other Functions)

16.3. Measurement Mode

In the Measurement Mode screen of the System screen, measurement mode settings for this recorder as
well as saving, readout, and initialization of all setup information can be made.
Pressing the System button and the Measurement Mode tab on the operation panel displays the following
screen. The same setup can be made in the Startup Screen that is displayed upon the startup.

16.3.1. Screen Display upon Startup

This screen can be opened upon startup when the check box is ticked. If this recorder is used under
the condition whose measurement mode is fixed, recording can be made immediately after the
recorder is turned on when this check box is not ticked.
16.3.2. Measurement Mode
Measurement mode can be changed. Pressing the measurement mode button displays the Window
for confirmation. To execute, press the OK button. The Input Monitor screen appears. The following
screen appears when the Memory Recorder button is pressed. The same screen appears for other
measurement mode.
16.3.2 Measurement Mode
16.3.1Screen Display upon Startup
16-4
16.3.3 Setup Value Save
16.3.4 Initialize
RA2300A Recorder (7001754-R01)