A&D Omniace III RA2300A Instruction Manual page 3

We thank you for your purchase of our product Thermal-Dot Recorder OMNIACEⅢ RA2300A
Please read this manual before operating this instrument.
This manual provides the information necessary to operate the RA2000Aseries recorder safely.
Place this manual within reach of the RA2300A. This manual covers basic functions and
operations of the RA2300A and handling precautions. For operation of other functions, please
refer to the separate-volume manuals listed below. If you encounter any problems in the manuals,
please contact our company.
<Separate-volume manuals>
Manual
RA2300A
Communication command
User's Manual
Instruction Manual
Amplifier Units
for RA2000A/DL2800A/
DF1000A
 Before Using
 When Opening Package
If opening the package in a warm room during the cold season, open the package after it has
reached room temperature to avoid any operational failure due to condensation on the surface
of the product.
 Examining Contents in Package
This instrument is delivered after a thorough examination at the factory prior to shipment.
However, please examine the product's condition and verify that no obvious shipping damage
has occurred after opening the package. Also, examine the specifications of the input units and
accessories. If there are any missing or damaged items, please contact our sales
representative.
Notice
 Turn off the power when the operation is abnormal.
If it is impossible to trace the causes of an abnormal operation, please contact our sales
representative. In this case, let us know in what way the unit was operating incorrectly and what
the environmental conditions are.
 The contents of this manual are subject to change without notice.
 This manual is copyrighted with all rights reserved. No parts of this manual may be transcribed
or reproduced without written permission.
 Please let us know if there are any points that are unclear or missing in this manual.
RA2300A (7001754-R01)
Introduction
This manual provides the information necessary
to operate the recorder with interfaces such as
LAN or RS-232C. It also covers descriptions on
interface commands to allow control by a PC.
This manual explains how to use and install amp
units.
1
Contents