12.2. Screen Operation
Press any button among Input Signal, Amp, Recording Condition, and Trigger buttons. The following
screen appears.
(5) Print Icon
(6) File Icon
(1) X-Y monitor
X-Y display for input signals is made.
signifies current input signal position (hereafter called "pen mark.")
(2) X-axis scale
Measurement scale specified to the X axis is displayed.
(3) Y-axis scale
Only one measurement scale specified to the Y axis is displayed. The scale to be displayed
can be changed using Y scale button.
(4) Amp setup
The setup for the channel specified to X and Y axes can be made. For how to use amp units,
see 7. Amp Unit.
RA2300A Recorder (7001754-R01)
(2) X axis scale
12-3
(7) X-Y Recorder control block
(3) Y axis scale
(1) X-Y monitor
12. X-Y Recorder
(8) X-Y axis settings
(4) Amp settings