A&D Omniace III RA2300A Instruction Manual page 164

19. Troubleshooting
Q 1: A copy of a screen can be saved into a file?
Answer The copy can be saved in bitmap format.
Select the sub setting tab by the System button and specify the folder in Save Screen Copy
Destination.
After this setting, you can push the Screen Copy button on the operation panel to save the
Details
copy to the specified folder in bitmap format.
Q 2: Please inform details of the folder or directory that automatically generated after
acquisition.
Answer The following folders are generated according to settings.
Filing mode / Real-time mode
(DNo.):(USERNAME)(Date Folder)\LOGFILE\SINGLE\REC_????
(\REPEAT: in case of Repeat)
"REC_????" is the File/Folder part specified on a screen.
Selecting Once, this part represents a file name.
Selecting Repeat, this part represents a folder name. After each acquisition, a file with a name
of REC_???? is generated under this folder (The name cannot be specified on a screen.)
Memory Recorder mode
(DNo.):(USERNAME)(Date Folder)\MEMFILE\SINGLE\REC_????
(\REPEAT: in case of Repeat or Endless)
The structure of this mode is the same as Filing mode.
However, selecting Repeat or Endless, the name of a generated file is BLK_????.
Details
Multi Recorder mode
(DNo.):(USERNAME)(Date Folder)\TRNFILE\SINGLE\REC_????
(\REPEAT: in case of Repeat or Endless)
Under the similar structure,
MARK.IDX (the file of real-time part. Its data format is peak)
and MEMBLK (the folder for memory block)
are generated.
The data of memory part is saved as BLK_???? file under the MEMBLK folder.
These are handled as a series of files and can be played in Zoom-in and Zoom-out replay
screen (Refer to Section 3-6 of Chapter 11.)
19-4
RA2300A Recorder (7001754-R01)