A&D Omniace III RA2300A Instruction Manual page 47

3: Input operation section
This section operates input character strings from various keys.
[Delete line]
Erases only the line indicated by the cursor
Capital letters and symbols can be input by pressing the [SHIFT] key
When the key is pressed, images displayed on the keyboard are changed after the key is
highlighted, thereby capital letters and symbols can be input.
Character strings to convert into kanji can be input by pressing the [IME] key.
When the key is pressed, kana input mode using Roman character is changed after the
key is highlighted.
To convert kana into kanji, press the [Blank/Conversion] key.
To select among kanji list, press the [Arrow] key or [Blank/Conversion] key. (To select
among kanji list on the panel, touch the panel directly.)
To confirm the selection, press the [Return] key.
Avoid inputting special characters (the upper key on input operation section such as Ω ,
μ , ε ) during IME mode.
4. [EXEC] key
To register character strings to input, press this key. The window will then close.
5: [Undo] key
To restore the previous entry, press this key.
RA2300A Recorder (7001754-R01)
4. Operation Flow (Flow of Measurement, Basic Settings and Operations)
4-7