Digital Indication; Cursor Display Information; Digital Indication Switching - A&D Omniace III RA2300A Instruction Manual

Table of Contents

14.4. Digital Indication

Indications for digital values and cursor position information for measurement values can be made.

14.4.1. Digital Indication

Measurement values are indicated in digital values. Time-axis position

to be displayed changes depending on the LED status.

X1 LED On

●

Measurement values of the cursor 1 position are indicated while

cursor X1 is moving.

X2 LED On

●

Measurement values for cursor 2 are indicated while cursor X2 is moving.

Others

●

Measurement values at the top of the waveform display region are displayed during the time

excepting when the cursor is moving as well as when waveform display position is moving.

If the recording data is the peak format, one data consists of two values: maximum and

TIPS

minimum value. To specify the digital value in either of maximum and minimum values,

open the Display/Printing screen. For more details, 15. Display and Printing.

This portion indicates the position information of cursors X1 and X2 and

the time difference between cursors (T).

Time axis display format changes to Duration, Time, and Value in this

order with depending on the setting. For more details, see 16. System

Setup.

Pressing the Digital Indication button on the upper part of the Replay monitor, contents of indication

can be switched.

The indication changes to No Indication, Digital Value, Cursor Value, Digital Value + Cursor Value,

and No Indication, in this order.

Digital indication switching can be set in the Display and Printing screen. For more details,

TIPS

see 15. Display and Printing.

RA2300A Recorder (7001754-R01)

14. Replay Display (Displaying Recording Data)

14-5

Table of Contents