Method Of Trigger Settings - A&D Omniace III RA2300A Instruction Manual

13. Trigger Settings (Capturing Target Data to be Recorded)

13.3. Method of Trigger Settings

Trigger is a timing signal to start recording. The RA2300A has a variety of trigger function, thus
enabling efficient data recording and printing. Pressing the Trigger button on the Operation Panel,
opens the Trigger Settings screen.
Operation panel
Target channel
Trigger setting
Pressing this portion switches the slope.
・Trigger detection at rising edge of a
signal.
・Trigger detection at falling edge of a
signal
・ＯＦＦ
13-6
Trigger mode setup
See
See
Trigger settings screen
The color of this portion changes
its color by touching. Then,
signal level can be set by dialing
the jog dial
RA2300A Recorder (7001754-R01)
13-2page
Trigger filter
setup
13-9 page