Memory Recording Condition Setup Block - A&D Omniace III RA2300A Instruction Manual

9. Memory Recorder (Recording High-speed Signals)

9.2.2. Memory Recording Condition Setup Block

(1) Sampling rate
Sampling rate for memory recording is set.
(2) Memory block size
Memory recording block size is displayed. Pressing a button opens a setup dialog box. Select
a memory size
Recording time: Recording time is calculated based on the sampling rate. Block count: The
block count is calculated based on the block size.
Memory block size can be expanded to more than 4 MW by limiting the number of
NOTE
channel for recording..
To limit the number of channel for recording
(3) Memory block and status indication
Block number to be recorded and data existence is indicated. Block number can be changed
using the jog dial.
(1) Sampling rate
(2) Memory Block Size
(3) Memory Block & Status Indication
(4) Sample recording image
(5) Pre-trigger
(6) Memory Recording Operation
(7) Auto data output
(8) Output range
(9) File output path
see 16. System Setup.
9-4
RA2300A Recorder (7001754-R01)