Displaying Input Waveform Monitor - A&D Omniace III RA2300A Instruction Manual

5.2. Displaying Input Waveform Monitor

The screen below is a screen appears when the Input Signal button is pressed in the Memory
Recorder Mode.
(7) REC icon
(1) Waveform display block
(1) Waveform display block
Waveform display format can be set. With this setting, waveform segmentation for display an
d printing can be made.
Chapter 15 Display and Printing
(2) Pen Recorder
Current values for analog amps are indicated with the pen position.
(3) Position marker
This is zero position for all analog amps.
(4) Amplitude scale
This is amplitude scale for analog amps. This scale can be hidden depending on the setup.
Chapter 15 Display and Printing
(5) Signal name
Indication of signal name that are entered by user can be made. The signal name can be hi
dden depending on the setup.
Chapter 15 Display and Printing
Chapter 16 System Setup
(6) Value indication
Numerical values of currently input signals are indicated. The values can be hidden depending on t
he setup.
Chapter 16 System Setup
RA2300A Recorder (7001754-R01)
5. Input Signal Monitor (Observing Input Signals)
(8) TOP bar
(4) Amplitude scale
(3) Position marker
(2) Pen position
5-3
(6)Value indication
(5) Signal name