A&D Omniace III RA2300A Instruction Manual page 95

(8) XY-axis setting
a) Channel settings
One channel for X axis and three channels for Y axes can be made. The amp types that can
be registered are only analog amps.
b) Pen-up and down
X-Y waveform display ON or OFF can be set for three Y-axis channels. Pen-down draws
waveforms; Pen-up does not draw waveforms. Pen mark always appears regardless of the
up/down setting. However, the pen mark appears on the X-Y monitor only and does not
appear on the X-Y printing.
RA2300A Recorder (7001754-R01)
a) Channel setting (X axis)
a) Channel settings (Y axis)
b) Pen-up and down (Y axis 1)
a) Channel setting (Y axis 2)
b) Pen-up and down (Y axis 2)
a) Channel settings (Y axis 3)
b) Pen-up and down (Y axis 3)
12-5
12. X-Y Recorder