Settings For Input Units; Amp Basics Screen - A&D Omniace III RA2300A Instruction Manual

7. Amp Units

7.1. Settings for Input Units

This section covers how to make settings on the Amp Basics and Amp Details screens. For detailed
settings for amps, see Instruction Manual Amplifier Units for RA2000A/DL2800A/DF1000A . To set
range and waveform printing for input unit, the Amp screen is used. The following screen appears after
pressing the Amp button.

7.1.1. Amp Basics Screen

In the Amp Basics screen, input unit setup condition can be checked by channel. To change the
channel, use the Scroll button.
(1) Channel
(3) Info display
(1) Channel
Channel number, amp type, and waveform color are indicated on this button. Pressing this
button displays the Amp Details screen, making more detailed setup.
(2) Amp setup block
This block is used to set basic settings for amp. As contents differ depending on the amp type,
refer to the descriptions of each amp.
(3) Information display
Setup information that is not indicated in the Amp Basic screen is displayed. The detailed
settings are made in the Amp Details screen. As contents differ depending on the amp type,
refer to the descriptions of each amp.
2CH High-Resolution DC Amp Setting
7-2
Scroll key
(2) Amp setup block
RA2300A Recorder (7001754-R01)