Cursor Value Indication; Waveform Segmentation; Thumbnail - A&D Omniace III RA2300A Instruction Manual

15.1.5. Cursor Value Indication

To display the cursor position information on the replay monitor, tick the check box of (7) on the
Display and Printing screen.

15.1.6. Waveform Segmentation

It is possible to set the number of waveform segmentation with the (8) button on the Display and
Printing screen. Size for each frame indicated with segmentation button and channel to be
displayed can be specified.
a) Number of waveform segmentation
The number of segmentation for waveform recording can be set. Any number from 1 to 16 can
be specified.
b) Frame selection tab
This is used to select the frame made by waveform segmentation. The upper side of the frame
is the first frame.
c) Frame size
Size for amplitude direction for a frame can be specified.
d) Display channel
Selection of channel to be indicated in the frame is available.
The frame size is limited to the effective printing range (216 mm) including the entire
NOTE
frame size and margins.

15.1.7. Thumbnail

Channel selection of the thumbnail to be displayed on the Replay monitor using the channel button
in (11) on the Display and Printing screen. Pressing the Thumbnail Save button in (10) executes the
save of the created thumbnail. The thumbnail display can be made quickly in the next time.
Select analog channels. If other channels, which are invalid channels, are selected,
NOTE
thumbnail waveform display cannot be made.
The setting part of the thumbnail is displayed only with the replay monitor.
NOTE
RA2300A Recorder (7001754-R01)
15. Display and Printing (Settings for Monitor Display and Printing)
b)
a)
15-3
c)
d)