A&D Omniace III RA2300A Instruction Manual page 132

16. System Setup (Other Functions)
16.4.5. Memory Save
The block data stored in memory can be saved. The following screen appears by pressing the Memory
Save button after moving to the folder where data will be saved in the File Operation tab in the System
screen.
(1) Target path for save
Path where a file is saved indicated. A dialog box appears by pressing a button, where the target path
for save can be changed.
(2) Memory block data list
Memory block data list is displayed. Data selection can be made by directly touching.
(3) Indication of selected data information
Recording information for the data selected is displayed. Data selection can be made based on this
recording information.
(4) Block data selection
Selection position for listed data is changed.
(5) CSV save
Memory block data can be saved as the CSV-format data. To save data as CSV file, add a check
mark; to save data as a binary format, do not add a check mark.
Time axis range, thinning-out, and delimiter code can be specified in Output Settings in the
TIPS
Replay screen. For more details, see Chapter 14 Replay Display
◆
(6) Save
◆
Pressing the OK button saves the selected files.
(7) Batch
All block data is selected. Pressing OK button saves several block data in a file.
File save of recorded data is made in the output specification screen in the Replay screen,
TIPS
too. For more details, see Replay Display
◆
◆
16-8
RA2300A Recorder (7001754-R01)