Replay Data Selection - A&D Omniace III RA2300A Instruction Manual

14.2. Replay Data Selection

To select the screen to be displayed on the Replay monitor, open the following screen by pressing the
Data Selection button.
(2) Data list
(1) Reference path
This indicates data reference target path. Moreover, it is possible to change the path with the
dialog box opened by
(2) Data list
Data file is listed which is in a specified reference path. Selection ban be made through direct
touching.
(3) Data selection
This changes selected data file.
(4) Recording information
This portion lists the information of recorded data that is selected in the data list. This
information may be used as a reference for data selection.
The following steps can change the reference data in the common folder.
TIPS
1) Press the left portion of the Data Selection button to activate jog dial. The file name will
be highlighted.
2) Turn the jog dial to select the file.
3) Press the right portion of Data Selection button to cancel the file. The data selection
finishes with entry release.
RA2300A Recorder (7001754-R01)
14. Replay Display (Displaying Recording Data)
(1) Reference path
(3) Data selection
14-3
(4) Recording info