Operation Panel - A&D Omniace III RA2300A Instruction Manual

2. Name and Function of Each Block

2.3. Operation Panel

This section explains button functions on the operation panel block.
(1)
(2)
(3)
(5)
(7)
(8)
(9)
(13)
(14)
(15)
(19)

Buttons related to jog dial
(1) Cursor X1/X2: Switching between cursors X1 and X2
This button is used to switch between cursors X1 and X2. The cursor whose LED comes on
can be moved through the touch panel or jog dial.
(2) Scroll: Scrolling displayed waveform
This button used to scroll the waveform. After this button is pressed, LED above comes on,
and then scrolling can be made with scroll bar on the touch panel and jog dial.
(3) Fine Tuning: Controlling movement speed of cursor and scroll
This button is used to change the scrolling speed for cursor or waveform. This change is made
by changing values on the screen.
(4) Jog dial: Continuous value changes, cursor movement on the
monitor, and waveform scrolling
Value can be continuously changed by rotating the jog dial. On the replay monitor, smooth
cursor movement and waveform scrolling can be made.

Waveform selection button
(5) Input Signal: Displaying input signal on the monitor
The input monitor screen, which has blue background, offers real-time observation of input
signals in the form of digital value or waveform.
Buttons related to the job dial
(4)
Waveform monitoring selection buttons
(6)
Buttons related to signal recording
(11)
(10)
(12)
Buttons related to recording and printing
(15)
(16)
(18)
2-4
RA2300A (7001754-R01)