Figure 50 Network > Wireless Lan > General > 802.1X + Dynamic Wep; Table 39 Network > Wireless Lan > General > 802.1X + Dynamic Wep - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
Figure 50 Network > Wireless LAN > General > 802.1x + Dynamic WEP
The following table describes the labels in this screen.
Table 39 Network > Wireless LAN > General > 802.1x + Dynamic WEP
LABEL
Security Mode
ReAuthenticati
on Timer
Idle Timeout
Dynamic WEP
Key Exchange
Authentication
Server
IP Address
Port Number
Shared Secret
Accounting
Server
Active
102
DESCRIPTION
Select 802.1x + Dynamic WEP.
Specify how often wireless stations have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the username
and password again before access to the wired network is allowed. Enter a time
interval between 10 and 9999 seconds.
Select the length of the keys. The longer the key, the stronger the security, but also
the more processing is required.
Enter the IP address of the external authentication server in dotted decimal notation.
Enter the port number of the external authentication server. You need not change this
value unless your network administrator instructs you to do so.
Enter a password (up to 31 alphanumeric characters) to be shared between the
external authentication server and the ZyXEL Device. The key must be the same on
the external authentication server. The key is not sent over the network.
These settings are optional.
Select this to enable user accounting through an external authentication server.
Chapter 6 Wireless LAN