Advanced Lan Screen; Figure 70 Network > Lan > Advanced - ZyXEL Communications P-870HW-I Series User Manual

Table 52 Network > LAN > IP Alias (continued)
LABEL
RIP Direction
RIP Version
Apply
Reset

8.4 Advanced LAN Screen

Use this screen to edit advanced settings, such as RIP and multicast, on the LAN port. To open
this screen, click Network > LAN > Advanced.
Figure 70 Network > LAN > Advanced
Chapter 8 LAN
DESCRIPTION
Use this field to control how much routing information the ZyXEL Device sends
and receives on the subnet.
None - The ZyXEL Device does not send or receive routing information on the
subnet.
Both - The ZyXEL Device sends and receives routing information on the subnet.
In Only - The ZyXEL Device only receives routing information on the subnet.
Out Only - The ZyXEL Device only sends routing information on the subnet.
Select which version of RIP the ZyXEL Device uses when it sends or receives
information on the subnet.
RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information.
RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing information.
RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information.
Click this to save your changes back to the ZyXEL Device.
Click this to reload the previous configuration for this screen.
P-870HW-I1 User's Guide
131