Wireless Lan Setup - ZyXEL Communications P-870HW-I Series User Manual

Table 119 Menu 3.2.1: IP Alias Setup (continued)
FIELD
Outgoing protocol
filters
IP Alias 2
IP Address
IP Subnet Mask
RIP Direction
Version
Incoming protocol
filters
Outgoing protocol
filters

24.4 Wireless LAN Setup

Use this menu to configure basic wireless settings and wireless security. See
page 93 for background information. To open this menu, enter 5 in menu 3.
Chapter 24 LAN Setup
DESCRIPTION
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Select this to add the specified subnet to the LAN port.
Enter the IP address of the ZyXEL Device on the subnet.
Enter the subnet mask of the subnet.
Use this field to control how much routing information the ZyXEL Device sends
and receives on the subnet.
None - The ZyXEL Device does not send or receive routing information on the
subnet.
Both - The ZyXEL Device sends and receives routing information on the
subnet.
In Only - The ZyXEL Device only receives routing information on the subnet.
Out Only - The ZyXEL Device only sends routing information on the subnet.
Select which version of RIP the ZyXEL Device uses when it sends or receives
information on the subnet.
RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information.
RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing
information.
RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information.
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
P-870HW-I1 User's Guide
Chapter 6 on
263