ZyXEL Communications P-870HW-I Series User Manual page 51

Table 2 Web Configurator: Navigation Panel and Icons (continued)
LINK/ICON
Wireless LAN
WAN
LAN
DHCP Server
NAT
Security
Firewall
Content Filter
Chapter 2 Introducing the Web Configurator
SUB-LINK FUNCTION
General Use this screen to configure basic wireless settings and
wireless security.
OTIST Use this screen to activate ZyXEL's One-Touch Intelligent
Security Technology (OTIST), which assigns the ZyXEL
Device's wireless security settings to OTIST-compatible
wireless devices.
MAC Filter Use this screen to block or allow other devices to access the
ZyXEL Device.
Advanced Use this screen to set up roaming and other advanced wireless
settings.
Internet Use this screen to configure ISP parameters, the WAN IP
Connection address, and the WAN MAC address.
Advanced Use this screen to set up DNS servers, RIP, multicasting, and
other advanced settings.
Traffic Redirect Use this screen to set up a backup router, if you have one, in
case the ZyXEL Devicecannot access the Internet.
IP Use this screen to set up the LAN IP address.
IP Alias Use this screen to partition your LAN interface into subnets.
Advanced Use this screen to set up RIP, multicasting, and other advanced
settings.
General Use this screen to configure the ZyXEL Device's DHCP server,
which assigns IP addresses and provides DNS server
information to other computers on the LAN or WLAN.
Static DHCP Use this screen to assign the same IP address to a computer
on the LAN or WLAN.
Client List Use this screen to look at the IP addresses of computers that
have connected to the ZyXEL Device since the DHCP server
was enabled.
General Use this screen to enable NAT.
Port Forwarding Use this screen to configure servers behind the ZyXEL Device.
Trigger Port Use this screen to change your ZyXEL Device's port triggering
settings.
Address Mapping Use this screen to configure network address translation
mapping rules.
General Use this screen to activate/deactivate the firewall and the
direction of network traffic to which to apply the rule.
Rules This screen shows a summary of the firewall rules, and allows
you to edit/add a firewall rule.
Anti Probing Use this screen to change your anti-probing settings.
Threshold Use this screen to configure the threshold for DoS attacks.
Filter Use this screen to block sites containing certain keywords in the
URL.
Schedule Use this screen to set the days and times for the ZyXEL Device
to perform content filtering.
P-870HW-I1 User's Guide
51