Wireless Security Screens; Wireless Security: None; Wireless Security: Basic Security Screen 1; Figure 15 Connection Wizard: Wireless Security: None - ZyXEL Communications P-870HW-I Series User Manual

3.5 Wireless Security Screens

The next screens depend on which type of Security you select in the previous screen.

3.5.1 Wireless Security: None

Use this screen to enable OTIST for your wireless network.

Figure 15 Connection Wizard: Wireless Security: None

The following table describes the labels in this screen.

Table 7 Connection Wizard: Wireless Security: None

LABEL
Do you want to
enable OTIST?
Setup Key
Back
Next
Exit

3.5.2 Wireless Security: Basic Security Screen 1

Use this screen to set up the WEP key(s) for your wireless network.
Chapter 3 Connection Wizard
DESCRIPTION
Select Yes if you want to set up OTIST security. If you set up OTIST, your wireless
network uses WPA-PSK security, not the security you selected and set up in the
previous screen(s). See Section 6.5 on page 108
up OTIST.
Type a key (password) 8 ASCII characters long.
Note: You must set up the same OTIST key on the wireless clients
too.
Click this to return to the previous screen.
Click this to save your changes on this screen and to proceed to the next screen.
Click this to close the wizard without saving the changes on this screen.
P-870HW-I1 User's Guide
for more information about setting
59