Log Settings Screen; Table 107 Maintenance > Logs > View Log - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
Log entries in red indicate alerts. The log wraps around and deletes the old entries after it fills
up. Click a column heading to sort the entries. A triangle indicates ascending or descending
sort order. The following table describes the fields in this screen.
Table 107 Maintenance > Logs > View Log
LABEL
Display
Email Log Now
Refresh
Clear Log
#
Time
Message
Source
Destination
Note

19.3 Log Settings Screen

Use this screen to configure to where the ZyXEL Device is to send logs; the schedule for when
the ZyXEL Device is to send the logs and which logs and/or immediate alerts the ZyXEL
Device is to record. To open this screen, click Maintenance > Logs > Log Settings.
238
DESCRIPTION
Select a category of logs to view; select All Logs to look at logs. The drop-down list
box only lists categories that you select in the Log Settings screen.
Click this to send the log screen to the e-mail address specified in the Log Settings
page (make sure that you have first filled in the E-mail Log Settings fields in Log
Settings).
Click this to update the screen.
Click this to delete all the logs, regardless of which ones are shown.
This field is a sequential value, and it is not associated with any log.
This field displays the time the log was recorded.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming packet.
This field lists the destination IP address and the port number of the incoming
packet.
This field displays additional information about the log entry.
Chapter 19 Logs