Remote Management And Nat; System Timeout; Snmp; Figure 115 Snmp Management Model - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide

16.1.2 Remote Management and NAT

When NAT is enabled:
• Use the ZyXEL Device's WAN IP address when configuring from the WAN.
• Use the ZyXEL Device's LAN IP address when configuring from the LAN.

16.1.3 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The ZyXEL Device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when a statistics
screen is polling. You can change the timeout period in the SYSTEM General screen.

16.1.4 SNMP

Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your ZyXEL Device supports SNMP agent functionality, which allows a
manager station to manage and monitor the ZyXEL Device through the network. The ZyXEL
Device supports SNMP version one (SNMPv1) and version two (SNMPv2). The next figure
illustrates an SNMP management operation. SNMP is only available if TCP/IP is configured.
Note: SNMP is only available if TCP/IP is configured.

Figure 115 SNMP Management Model

206 Chapter 16 Remote MGMT