Table 90 Management > Bandwidth Mgmt > Configuration - ZyXEL Communications P-870HW-I Series User Manual

See Appendix I on page 431
in this screen.
Table 90 Management > Bandwidth MGMT > Configuration
LABEL
Active
LAN BW
Budget(kbps)
WLAN BW
Budget(kbps)
WAN BW
Budget(kbps)
#
Direction
Name
Service
Dest Port
Chapter 15 Bandwidth MGMT
for examples of services. The following table describes the labels
DESCRIPTION
Select this to enable bandwidth management.
Enter the amount of bandwidth for this interface that you want to allocate using
bandwidth management.
It is recommended to set this speed to match what the LAN port's connection can
handle. For example, set it to 100000 kbps if your Ethernet network has a maximum
speed of 100000 kbps.
You can set this number higher than the interface's actual transmission speed. This will
stop lower priority traffic from being sent if higher priority traffic uses all of the actual
bandwidth.
You can also set this number lower than the interface's actual transmission speed.
However, this will cause the ZyXEL Device to not use some of the interface's available
bandwidth.
Enter the amount of bandwidth for this interface that you want to allocate using
bandwidth management.
It is recommended to set this speed to match the maximum speed of the wireless
network. In most cases, set it to 54000 kbps, unless your wireless network cannot
handle this speed.
You can set this number higher than the interface's actual transmission speed. This will
stop lower priority traffic from being sent if higher priority traffic uses all of the actual
bandwidth.
You can also set this number lower than the interface's actual transmission speed.
However, this will cause the ZyXEL Device to not use some of the interface's available
bandwidth.
Enter the amount of bandwidth for this interface that you want to allocate using
bandwidth management.
It is recommended to set this speed to match what the WAN port's connection can
handle. For example, set it to 40000 kbps if your broadband modem or router has a
maximum speed of 40000 kbps.
You can set this number higher than the interface's actual transmission speed. This will
stop lower priority traffic from being sent if higher priority traffic uses all of the actual
bandwidth.
You can also set this number lower than the interface's actual transmission speed.
However, this will cause the ZyXEL Device to not use some of the interface's available
bandwidth.
This field is a sequential value.
Select LAN to apply bandwidth management to traffic that the ZyXEL Device forwards
to the LAN.
Select WAN to apply bandwidth management to traffic that the ZyXEL Device forwards
to the WAN.
Select WLAN to apply bandwidth management to traffic that the ZyXEL Device
forwards to the WLAN.
This field displays the name of the rule. You can change it. Enter a descriptive name of
up to 20 alphanumeric characters, including spaces.
This field displays one of the ZyXEL Device's predefined applications, or it displays
User defined. If you want to change it to User defined, you may need to use the Edit
Bandwidth Management Rule screen to set up detailed settings.
Enter the port number of the destination.A blank destination IP address means any
destination IP address.
P-870HW-I1 User's Guide
201