Schedule Set Setup; Figure 231 Menu 26: Schedule Setup; Table 162 Menu 26: Schedule Setup - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide

Figure 231 Menu 26: Schedule Setup

Schedule
Set #
------
1
2
3
4
5
6
The following table describes the labels in this menu.

Table 162 Menu 26: Schedule Setup

FIELD
1-12
Enter Schedule Set
Number to Configure
Edit Name

38.3 Schedule Set Setup

This menu is only applicable if your Internet connection uses PPPoE encapsulation. Use this
menu to configure the schedule sets in the ZyXEL Device. To open this menu, enter the
number of the schedule set in the Enter Schedule Set Number to Configure field, enter the
name of the schedule set in the Edit Name field, and press [ENTER] in menu 26.
348
Menu 26 - Schedule Setup
Name
-----------------
_______________
_______________
_______________
_______________
_______________
_______________
Enter Schedule Set Number to Configure= 0
Edit Name= N/A
DESCRIPTION
This field shows the beginning of the name of each schedule set.
Lower numbered sets take precedence over higher numbered sets. This avoids
scheduling conflicts. For example, if sets 1, 2, 3 and 4 in are applied in the
remote node, then set 1 takes precedence over set 2, 3 and 4.
If you want to configure a schedule set, enter the number of the static route in
this field, enter the name in the Edit Name field, and press [ENTER]. Menu
26.1 appears.
If you want to delete a schedule set, enter the number of the static route in this
field, leave the name blank in the Edit Name field, and press [ENTER].
Enter the name of the schedule set you want to configure, or leave this field
blank to delete the specified schedule set.
Schedule
Set # Name
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
Chapter 38 Schedule Setup